Catalog
← Back
Oil Seals (Metric)
Please rotate your device to view content.
TOLERANCES
OIL SEALS -- METRIC
| Nominal | ||||
| Bore Diameter | Bore Tolerances | |||
| d | ||||
| (Metric) | (Inch) | |||
| Over | Incl. | Maximum | Minimum | |
| 6 | 10 | +.0008 | -.0000 | |
| 10 | 18 | +.0010 | -.0000 | |
| 18 | 20 | +.0012 | -.0000 | |
| 20 | 50 | +.0015 | -.0000 | |
| 50 | 80 | +.0018 | -.0000 | |
| 80 | 120 | +.0022 | -.0000 | |
| 120 | 180 | +.0024 | -.0000 | |
| 180 | 250 | +.0028 | -.0000 | |
| 250 | 315 | +.0031 | -.0000 | |
| 315 | 400 | +.0035 | -.0000 | |
| 400 | 500 | +.0038 | -.0000 | |
| Nominal | Outside Diameter Tolerances | Out-Of-Roundness | |||||||
| Outside Diameter | Press Fit | Tolerance | |||||||
| D | (Inch) | (Inch) | |||||||
| (Metric) | Rubber O.D. | Steel O.D. | |||||||
| Over | Incl. | Maximum | Minimum | Maximum | Minimum | ||||
|
|
|||||||||
| 0 | 50 | +.0118 | +.0059 | +.0078 | +.0039 | .0098 | |||
| 50 | 80 | +.0137 | +.0078 | +.0090 | +.0051 | .0137 | |||
| 80 | 120 | +.0137 | +.0078 | +.0098 | +.0059 | .0196 | |||
| 120 | 180 | +.0177 | +.0098 | +.0110 | +.0070 | .0255 | |||
| 180 | 300 | +.0177 | +.0098 | +.0118 | +.0078 | .0314 | |||
| 300 | 500 | +.0216 | +.0118 | +.0137 | +.0090 | .0393 | |||
NOTE:
|
|||||||||