Consolidated Bearings

Catalog

← Back

MR-64-2RS

NEEDLE BEARINGS - CAGE TYPE - WITHOUT INNER RACE (INCH) - TWO SEALS
Dimensions (inch)F4
D5
B2
Approx. Wgt. lbs3.615
Appropriate Inner RaceMI-54MI-56
InterchangeMcGillMR-64-SS
RBC-
Torrington-
MR-64-2RS diagram one
  1. For applications where the bearing is run directly on the shaft, no inner race is required. The shaft hardness should be 60 Rockwell C scale.
  2. In order to adapt the seals, a narrow roller is used. Therefore, the load ratings are equivalent to the narrow type - i.e. MR-16-2RS load equal to MR-16 N.
  3. Lubrication - Outer races have an external centered oil groove and one oil hole. Inner races have an internal centered oil groove and one oil hole.
  4. Material - Outer races, inner races and rollers are made from 52100 steel and hardened to Rockwell hardness 60-64 RC. These bearings are equipped with stamped steel cages.